IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
E193429
MODEL NOS. : CKS- 10W5L/1F(0.08A)-ISA- 1
120 V , 60 Hz, 0.08 A, 9.6 W
USE AND CARE INSTRUCTION
a) When the product is placed on a live tree, the tree should be well-maintained and fresh.
place on live trees in which the needles are brown or break off easily. Keep the
Do not
with water.
tree holder filled
b) If the product is placed on a tree, the tree should be well-secured and stable.
c) Before using or reusing, inspect product carefully. Discard any products that have cut, dam-
aged or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connec-
tions or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed, including
trees, branches or bushes to avoid any undue strain or stress on the product conductors, con-
nections, and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
PRODUCT NO. : 052-6080-8
Fabric Lantern String Lights
295x255mm
a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
c) Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to remove fuse.
d) Risk of fire. Replace fuse only with 3 A, 125 V fuse (provided with product). Failure to do so
may be a fire hazard.
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not
be removed. Discard product if the attachment plug is damaged.
Replace the lamp.
a) Grasp plug and remove from the receptacle or other outlet device.
pulling on cord.
Do not unplug by
b) Pull bulb and plastic base straight out of lampholder.
c) Replace bulb with only 12 V, 0.96 W, (regular bright) type lamp
(provided with product)
User servicing instructions
Replace the fuse.
CAUTION
a)READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault
Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for
proper installation.
c) This seasonal-use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources
of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let bulbs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electrical product-not a toy! To avoid risk of fire, burns, personal injury and electric
shock it should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string. Hang ornaments only
on the tree itself.
k) Do not close doors or windows on the product or electrical cable as this may damage the
wire insulation.
l) Do not cover the product with cloth, paper or any material not part of the product when in use.
m) This product is equipped with push-in type bulbs. Do not twist bulbs.
n) This product employs overload protection (fuse). A blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any addi-
tional strings or products that may be attached to the product. Replace the fuse as per the
user-servicing instructions (follow product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short-circuit may be present and the product should
be discarded.
o) Read and follow all instructions that are on the product or provided with the product.
p) SAVE THESE INSTRUCTIONS.
CAUTION
1. Risk of fire. This product does not contain lamp shunts, which allow the product t
operate if one lamp burns out. Replace lamps only with the spare lamps provided
with this product.
2. To reduce the risk of fire and electric shock: a) Do not install on trees having needles,
leaves or branch coverings of metal or materials which look like metal, and b) Do not
mount or support strings in a manner that can cut or damage wire insulation.
o
To reduce the risk of overheating, replace burned out lamps promptly.
Use 12 V, 0.96 W lamps only.
If the new lamp base does not fit in lamp holder, follow the steps below
before step 3.
1. Remove the base of burned out lamp by straightening lamp leads and gently
pull lamp out.
2. Thread leads of new lamp through holes in old base with one lead in each hole.
3. After lamp is fully inserted into base, bend each lead up, like other lamps in the
ight setso that the leads will
touch
the contacts
inside
the
lampholder.
Connecting Sets End to End
When multiple products are connected together, do not exceed the lowest of the
Indicated maximum wattage on the cord tag near the connected product’s
receptacle.
If connecting to a lighting string that does not have a Wattage (W)
rating
[
found
on the tag within 6 inches of the plug]
calculate the wattage as follows:
Multiply
the current (
_______
A) which is on the flag
-
type tag by 120.
For Example:
Lighting string is rated 120 V, 60 Hz, 0.2 A. 0.2 X 120 = 24 W
Add the wattage of each light string
together for a total of 216 W or less.
(Do not exceed 216 W.)
