Cansonic ultradash S1, Instruction Manual

Page: 31 / 36

DASH CAM – Windows & Mac
The Cansonic UltraDash S1 standard turn on feature allows for you to use the
camera anywhere you desire. Simply turn on the camera and let your internal
battery run as the camera records or takes pictures. A fully charged UltraDash
S1 will have enough power to last estimated 2 hours depending on how you
utilize the camera.
TIP: Remember to always turn off the UltraDash S1 before disconnecting from
your computer.
VIDEO & AUDIO OUTPUT
Thank you for choosing Cansonic! The UltraDash S1 can be connected to most
external video equipment that utilizes standard RCA Inputs. You will need to
purchase the AV Cable in order to continue this process.
Connect the AV Cable to your UltraDash S1 and the external device. Once you
have done so, continue to turn on the UltraDash S1 and the external device.
The UltraDash S1’s screen will appear blank as the image it is supposed to
view will now be shown on the external device. You will know that the UltraDash
S1 is turned on by the LED light.
You cannot access the UltraDash’s menu while it is being used in AV OUT mode.
Remember to charge the UltraDash S1 prior to AV OUT mode since it will be
using its internal battery. If you are going to be utilizing the UltraDash S1 longer
than the internal powers battery life, use the supplied USB cable and a standard
5Vdc/USB power adaptor.
TIP: Be sure that the external power source of the power adaptor is 5Vdc
output in order to avoid damage to the UltraDash S1 which is not covered
under the manufacturer’s warranty.
Visit cansonic.com to purchase the correct AV Cable.
30