Cleaning the Print Head
Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check
pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head
consumes ink, so clean the print head only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the LCD.
Select
A4
or
Letter
for
Page size
and
Plain paper
for
Type
, then press the
OK
button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
3. Open the paper output tray gently.
4. Clean the print head.
1. Select
Setup
on the
HOME
screen.
The setup menu screen will appear.
2. Select
Maintenance
, then press the
OK
button.
The
Maintenance
screen will appear.
3. Select
Cleaning
, then press the
OK
button.
191
Summary of Contents for MG5600 series
