Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the LCD.
Select
A4
or
Letter
for
Page size
and
Plain paper
for
Type
, then press the
OK
button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
3. Open the paper output tray gently.
4. Print the nozzle check pattern.
1. Select
Setup
on the
HOME
screen.
The setup menu screen will appear.
2. Select
Maintenance
, then press the
OK
button.
The
Maintenance
screen will appear.
3. Select
Print nozzle check pattern
, then press the
OK
button.
187
Summary of Contents for MG5600 series
