Canon Z5000, Configuration Manual

Page: 98 / 168

4
4-14 Setting up the ColorPASS from a Windows Computer
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 5.
The ColorPASS requires a unique, valid IP address. You can set a static address
yourself, or specify that the ColorPASS use DHCP, BOOTP, or RARP to obtain IP
addresses automatically.
N
OTE
:
If you specify the DHCP, BOOTP, or RARP protocol, the ColorPASS reboots
when you save your changes and exit Setup. Allow the ColorPASS to reboot and return
to Idle before printing a Configuration page or proceeding with any other operations.
To set the subnet mask, enter one of the following values:
255.0.0.0 if the IP address starts with a number less than 128
255.255.0.0
if the IP address starts with a number from 128 through 191
255.255.255.0 if the IP address starts with a number greater than 191