Canon Z5000, Configuration Manual

Page: 72 / 168

3
3-36 Performing Setup from the Control Panel
Printer Setup options
Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information on ColorPASS print connections, see
page 2-1.
In the list of options that follows, default values, where applicable, appear in brackets.
N
OTE
:
For users to use the Fiery utilities and Fiery WebTools or to print to the
ColorPASS over a TCP/IP network, you must publish at least the Hold queue or the
Print queue.
Publish Direct Connection
Yes/No [Yes]
This option enables users to print (or download) jobs to the ColorPASS without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the ColorPASS, you must publish the Direct
connection.
Publish Print Queue
Yes/No [Yes]
This option enables users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the ColorPASS disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
Publish Hold Queue
Yes/No [Yes]
Use this option to enable users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.
1. In the main Setup menu, choose Printer Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup