Canon Z5000, Configuration Manual

Page: 17 / 168

1
1-3 Stages of installation on the network
Summary of ColorPASS network installation
At each workstation that will print to the
ColorPASS:
• Install the appropriate printer files and connect
to one or more queues.
• For computers that will use them, install Fiery
utilities and an Internet browser.
• Verify the ColorPASS in the list of printers and
run a test print.
ColorPASS available on the network
Network server
UNIX Mac OS Windows
ColorPASS
ColorPASS
Prepare a network node. Connect the ColorPASS
to the copier and to the network. If you use a
computer running the Command WorkStation
software, connect it to the network.
Configure UNIX, Windows NT 4.0 and IPX (Novell)
servers to specify ColorPASS print queues and
ColorPASS users.
No special configuration of AppleShare servers is
required.
On the ColorPASS Control Panel, configure at least
the Server Setup, Network Setup, and Printer
Setup. From the Control Panel or the Command
WorkStation, configure the remaining Setups.
Calibrate the ColorPASS.
S
ERVER CONFIGURATION
C
ONNECTION
C
LIENT SETUP
C
OLOR
PASS
SETUP