background image

5

5-15

ColorPASS on a TCP/IP network with Windows NT 4.0

T

O

 

CONNECT

 

AND

 

PRINT

 

TO

 

THE

 C

OLOR

PASS 

SHARED

 

BY

 

A

 

W

INDOWS 

NT 4.0 

SERVER

:

For Windows 95/98/2000/Me clients, before printing, double-click the 
Windows NT 4.0 server icon in the Network Neighborhood window, and double-click 
the printer name. 

You will be prompted to set up the printer. When you choose to set it up, the Add 
Printer Wizard dialog box appears. Follow the procedures in Getting Started.

For Windows NT 4.0 Workstation clients, before printing, connect to the print server 
computer and select the ColorPASS. Right-click and choose the Open command.

When prompted, click Yes to have Windows set up the printer.

After clients have selected the printer, they can choose it from the Print Setup, Page 
Setup or Print dialog box of their application. Clients can change printing options for 
their own job, but printer properties are grayed and not available for changing. When a 
client chooses Print, the job is transmitted to the Windows NT 4.0 print server, and 
from there to the selected print connection on the ColorPASS. The job is listed in the 
Print Manager on the client workstation, and the administrator can track it in the 
ColorPASS window in the Print Manager on the Windows NT 4.0 print server.

Configuring Windows computers without a Windows NT 4.0 server

If your network does not have a Windows NT 4.0 server, Windows 95/98/Me and 
Windows NT 4.0/2000 workstations can still print to the ColorPASS. This method of 
printing is called Windows printing, sometimes known as SMB printing. In this type 
of network environment, computers running Windows 95/98/Me and Windows 
NT 4.0 Workstation operate in a peer-to-peer environment and communicate directly 
with the ColorPASS when users send print jobs. 

Many of the same prerequisites for setting up printing through a Windows NT 4.0 
server also apply to setting up Windows printing where a server is not present. The 
prerequisites are summarized below, and you can find more detail in the ColorPASS 
documentation and your Microsoft documentation.

Summary of Contents for Z5000









































































































































































Reviews: