Canon XF705, Instruction Manual

Page: 70 / 231

Zooming
70
Grip zoom rocker: A pproximate zoom s peed s
(time required to zoom end-to-end)
* When the zoom speed is too fast, it will be more difficult to focus while zooming.
Setting the Zoom Speed
1 To set the overall speed level, select [Zoom Speed Level].
>
[
v %
Camera Setup]
>
[Zoom Speed Level]
2 Select [Low], [Normal] or [High] and then press SET.
3 Select [Grip Zoom Speed].
>
[
v &
Camera Setup]
>
[Grip Zoom Speed]
4 Select the desired option and then press SET.
• If you selected [Constant] or [User Setting], select the constant speed or customize the zoom speed pattern
with the following procedures.
Option s
[Constant]: Select one of 16 constant zoom speeds.
[Variable]: Variable zoom speed (zoom faster the harder you press).
[User Setting]: You can customize up to 3 zoom speed patterns, setting the desired zoom speed for 5
individual pressure levels. You can, for example, set a pattern where the grip zoom rocker only
starts to react beyond a certain pressure level to avoid accidental zoom operations.
To s elect the con s tant s peed level
1 Select [Constant Speed].
>
[
v &
Camera Setup]
>
[Constant Speed]
2 Select the desired speed (1 to 16) and then press SET.
To cu s tomize the [U s er S etting] zoom s peed pattern
1 Select [Users Settings].
[
v &
Camera Setup]
>
[Users Settings]
2 Push the joystick left/right to select the zoom speed pattern ([User 1] to [User 3]) you want to use.
• To use the preset zoom speed pattern as is, select [OK] and then press SET. The rest of the procedure is not
necessary. Otherwise, continue the procedure to customize the zoom speed pattern.
3 Select [Edit] and then press SET.
4 Push the joystick up/down to select the desired speed (0 = disabled, 1 to 16) and then press SET.
• Change the speed for the rest of the pressure levels in the same way.
5 Select [Set] and then press SET.
• To reset the zoom speed pattern to its preset values, select [Reset] instead.
NOTES NOTES
• When
>
[
v %
Camera Setup]
>
[High-Speed Zoom] is set to [On] and the grip rocker's zoom
speed is set to [Variable], when you operate the zoom in record standby mode, the actual zoom speed will be
as if the overall speed level were set to [High]. While recording, the zoom speed level will follow the speed level
set in the menu.
[
v &
Camera Setup]
>
[
v %
Camera Setup]
>
[Zoom Speed Level]
[Grip Zoom Speed] [Con s tant Speed] [Low] [Normal] [High]
[Con s tant]
[1] ( s lowe s t) 4 min 38 s ec 2 min 1 min
[16] (fa s te s t) 4.2 s ec 2.6 s ec 0. 9 s ec*
[Variable] – 4.2 s ec – 4 min 38 s ec 2.6 s ec – 2 min 1 s ec* – 1 min