Canon XF705 Instruction Manual Download Page 194

Page: 194 / 231

Menu Option

194

The default value depends on the country/region or purchase.

Appears on page

mode.

Appears on page

mode.

[

My Menu] (

mode only)

[Review Recording]

[Entire Clip]

, [La

t 4

ec]

(

112)

[Re

et Hour Meter]

–

The camcorder ha

two “hour meter

” – the fir

t keep

track of total operation time and the

econd

keep

track of operation time

ince the la

t time the

econd hour meter wa

et with thi

function.

Thi

etting i

available only in

mode.

[Fan]

[Automatic],

[Always On]

(

)

[Certification Logo

]

–

play

certification logo

that apply to the camcorder.

[Firmware]

–

play

the current firmware ver

ion of the camcorder. Thi

etting i

available only in

mode

but i

ually grayed out.

Menu item

Setting option

and additional information

[CAMERA-1 Edit]

[Regi

ter], [Move], [Delete], [Re

et All], [Rename]

(

26)

[CAMERA-2 Edit]

[Regi

ter], [Move], [Delete], [Re

et All], [Rename]

[CAMERA-3 Edit]

[Regi

ter], [Move], [Delete], [Re

et All], [Rename]

[CAMERA-4 Edit]

[Regi

ter], [Move], [Delete], [Re

et All], [Rename]

[CAMERA-5 Edit]

[Regi

ter], [Move], [Delete], [Re

et All], [Rename]

Menu item

Setting option

and additional information

Summary of Contents for XF705








































































































































































































































Search results

Summary of Contents for XF705

Reviews:

Brands by name

Popular brands

Canon XF705, Instruction Manual

Search results

Summary of Contents for XF705

Reviews:

Brands by name

Popular brands