Canon XF605, Instruction Manual

Page: 119 / 238

119
Cu s tom Picture S etting s
Cu s tom Picture Setting s
The camera lets you change many settings (
A
123) that control various aspects of the image produced. As a
set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 20 custom picture files (in the camera or on an SD card), and load them later to
apply exactly the same settings (
A
122). You can also save the custom picture file as part of the metadata
recorded with XF-AVC clips (
A
122). While recording (excepting pre-recording), and while IP streaming is
activated, the custom picture file cannot be selected and some image quality adjustments (including Look Files)
are not available.
Selecting Cu s tom Picture File s
In CAMERA mode, select a custom picture file to apply its settings to your recordings or to edit, rename, protect,
or transfer it.
1 S elect > [
/
Cu s tom Picture] > [ S elect
/
File].
• The custom picture file selection screen is displayed.
• Select one of the custom picture files saved in the camera (C1 to C20). To use the settings of a custom
picture file saved on an SD card, copy the file to the camera in advance (
A
122).
• You can also use direct touch control's
Æ
recording settings (
A
49).
2 S elect the de s ired file.
• When you close the menu, the selected custom picture file’s settings will be applied.
Pre s et Picture Setting s
The following settings are saved to custom picture files C1 to C20 as preset custom picture settings. Custom
picture files C1 to C8 are protected by default and need to be unprotected before they can be edited.
Preset custom picture
file
[Gamma/Color Space]* [Color Matrix]* Look File Characteristics
C1: [BT.709 Normal]
[BT.709 Normal /
BT.709]
[Video] –
These settings are appropriate for playback on BT.709 compliant
monitors.
C2: [BT.709 Wide DR]
[BT.709 Wide DR /
BT.709]
[Video] –
These settings produce a wide dynamic range and are
appropriate for playback on BT.709 compliant monitors.
C3: [BT.709 Standard]
[BT.709 Standard /
BT.709]
[Video] –
These settings are appropriate for playback on BT.709 compliant
monitors, and use a gamma curve that meets ITU-R BT.709
standards.
C4: [Canon Log 3]
[Canon Log 3 /
C.Gamut]
[Neutral] –
These settings use Canon Log 3 gamma and require post-
production processing.
C5: [PQ] [PQ / BT.2020] [Neutral] –
These settings use a high dynamic range gamma curve
compliant with the PQ standard defined by ITU-R BT.2100.**
C6: [HLG] [HLG / BT.2020] [Neutral] –
These settings use a high dynamic range gamma curve
compliant with the HLG standard defined by ITU-R BT.2100.**
C7: [EOS Standard]
[BT.709 Wide DR /
BT.709]
[Neutral] On
Reproduces the image quality and look of an EOS
interchangeable lens DSLR camera with its picture style set to
[Standard].
C8: [EOS Neutral]
[BT.709 Wide DR /
BT.709]
[Neutral] On
Reproduces the image quality and look of an EOS
interchangeable lens DSLR camera with its picture style set to
[Neutral].
C9: [USER9] to
C20: [USER20] [BT.709 Normal /
BT.709]
[Video] –
These settings use a gamma curve with a very wide dynamic
range, optimized for playback on BT.709 compliant monitors.