Canon XF400, Instruction Manual

Page: 80 / 164

Recording Audio
80
Selecting the Audio Input Source for Audio Channels
Using the INPUT 1 / INPUT 2 Terminals
1 Select the INPUT terminals as the audio input for the desired audio channel.
CH1 / CH2: Set the corresponding audio input selection switch to INPUT 1 or INPUT 2.
CH3 / CH4:
>
[
C
!
Audio Setup]
>
[CH3/CH4 Input]
>
[ INPUT Terminal]
>
[
X
]
2 To select the audio source, set the corresponding INPUT switch to MIC (microphone) or LINE (audio device).
• To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the
microphone first, before turning the phantom power on. Keep the microphone connected when turning off
the phantom power.
• When using the INPUT terminals to record to only one channel, use the INPUT 1 terminal.
IMPORTANT
• When connecting a microphone or device that does not support phantom power, make sure to set the
corresponding INPUT switch to MIC or LINE, respectively. If you set the switch to MIC+48V, the microphone or
device may be damaged.
To record the s ame audio input to two audio channel s
By default, when using the INPUT terminals, each audio input is recorded to a separate audio channel (INPUT 1
to CH1 and INPUT 2 to CH2). If necessary (for example, as an audio backup recording), you can record the
audio input into the INPUT 1 terminal to both audio channels, CH1 and CH2. In that case, you can adjust the
audio recording levels of each channel independently of each other.
1 Select [CH2 Input].
>
[
C
!
Audio Setup]
>
[CH2 Input]
2 Touch the desired option and then touch [
X
].
Options
[ INPUT 2]: Records audio to each channel separately. Audio input into INPUT 1 is recorded to CH1, while
audio input into INPUT 2 is recorded to CH2.
[ INPUT 1]: Audio input into INPUT 1 is recorded to both channels. Audio input into INPUT 2 will not be
recorded.
INPUT 1 / INPUT 2 switches
Audio input selection switches
for INPUT 1 for INPUT 2