Recording
92
3
Recording Audio
Recording Audio
The camcorder features two-channel linear PCM audio recording and
playback with a sampling frequency of 48 kHz. You can record audio
using the built-in microphone, optional external microphone (XLR
terminal) or line input (XLR terminal). You can select the audio input
independently for channel 1 and channel 2.
Using the Built-in Microphone
After you activate the built-in microphone, you can configure the low-cut
filter and sensitivity, and activate the attenuator.
Set the AUDIO IN switch of the desired channel to INT.
Configuring the Low-Cut Filter
1 Open the [Int. Mic Low Cut] submenu.
[
m
Audio Setup]
[Audio Input]
[Int. Mic Low Cut]
2 Select the desired option and then press SET.
Options
Operating modes:
[
m
Audio Setup]
[
Audio Input]
[
Int. Mic Low Cut]
[Off]
[Off]:
For recording audio under usual conditions.
[LC1]:
For recording mainly people’s voices.
[LC2]:
For reducing the background sound of wind when recording
outdoors in windy surroundings (for example, on a beach or close to
buildings). Note that when you use this setting some low-frequency
sounds may be suppressed along with the sound of wind.
COP
Y
