Canon XF200, Instruction Manual

Page: 63 / 246

63
Gain
Eng
lis
h
Setting the Gain Limit (AGC Limit)
For each gain position, you can activate the gain limit to prevent the camcorder from setting a level higher than a
preset limit between 0 dB and 27 dB. When you set the camcorder to full auto mode (
A
49) or infrared mode
(
A
126), [AGC Limit] will be set to [Off/27 dB].
1 Open the [AGC Limit] submenu.
[
~
Camera Setup]
>
[Gain]
>
[L], [M] or [H]
>
[AGC Limit]
2 Select the desired level and then press SET.
Manual Gain
Using the Joystick
1 Change the gain mode to manual using the direct setting mode.
• Press SET and push the joystick left/right until the gain mode icon is highlighted in orange, select the icon
and press SET. For details refer to Using the Direct Setting Mode (
A
57).
• The current position of the GAIN switch will be set to manual gain.
2 Adjust the gain value using the direct setting mode.
• Press SET and push the joystick left/right until the gain value is highlighted in orange, select the desired
value and then press SET. For details refer to Using the Direct Setting Mode (
A
57).
NOTES
• You can also select the gain value from the respective [Manual] setting ([
~
Camera Setup]
>
[Gain]
>
[L],
[M] or [H]
>
[Manual]). Using the menu, you can also select [Fine Tuning] and then select a gain level between
-6.0 dB and 24.0 dB in 0.5 dB increments. Once you have selected [Fine Tuning] in the menu, you can then
adjust the gain value in 0.5-dB increments also using the direct setting mode.
Remote Operation Using Browser Remote
After completing the necessary preparations (
A
182), you can adjust the gain value of the currently selected
gain position remotely from a connected device using the Browser Remote application.
1 Press the gain mode button on the Browser Remote screen and then select [Manual].
2 Press the current gain value and select the desired value from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
햲
햳
[
~
Camera Setup]
[Gain]
[L], [M] or [H]
[AGC Limit]
[Off/27 dB]
COP
Y