Canon XF100, Instruction Manual

Page: 99 / 186

99
Custom Picture Settings
Custom Picture Settings
You can preset a number of picture-related settings. After changing individual settings to your preference, you
can save the whole set in the camcorder or SD card as a custom picture file. You can then load the file at a later
date to change the current settings to the preset levels you selected. You can even embed the custom picture
settings in clips recorded to a CF card or photos recorded to an SD card. Conversely, you can have the
camcorder record clips and photos without embedding custom picture settings.
You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD
card. Custom picture files can be copied between the camcorder and recording media.
Custom preset files created with previous Canon camcorders are not compatible with this camcorder. Custom
picture files created with this camcorder are compatible with only the XF105 and XF100.
Available custom picture settings
Selecting Custom Picture Files
Select a custom picture file to apply its settings to your recordings or to
edit, rename, protect, or transfer it.
1 Open the [Custom Picture] submenu.
[
l
Camera Setup] [Custom Picture]
2 Select [
K X
Select File] and then press SET.
• A list of custom picture files in the camcorder and SD card appears. Files in the camcorder begin with [C1]
to [C9]; those on the SD card begin with [SD1] to [SD20].
3 Select the desired file and then press SET.
• To apply the file’s settings, press the MENU button to exit the menu. An icon representing the selected
custom picture file will appear on the left side of the screen.
• To perform other operations on the file, continue with the following procedures.
• Select [Off] to record without embedding a custom picture file.
Operating modes:
Category Menu item Submenu
0
Settings related to light and dark
tones [Gamma] 102
[Black Gamma] 103
[Black] [Master Pedestal] 102
[Master Black] 102
[Knee] All settings except [Saturation] 103
[Other Functions] [Setup Level] 106
[Clip at 100%] 106
Settings related to sharpness and
noise [Sharpness] 104
[Noise Reduction] 104
[Skin Detail] 104
[Selective NR] 105
Settings related to color [Low Key Satur.] 103
[Knee] [Saturation] setting 103
[Color Matrix] 105
[White Balance] 105
[Color Correction] 106
[
l
Camera Setup]
[Custom Picture]
[
K X
Select File]