87
Reviewing a Recording
Reviewing a Recording
When the camcorder is in
mode, you can review the last clip that
was recorded.
1 Open the [Rec Review] submenu to set the review length.
[
J
Other Functions]
[Rec Review]
2 Select the desired option and then press SET.
3 After you finish recording, press the
U
button.
• The last clip that was recorded is played back without audio for the
selected duration. [
A
REVIEW] appears at the top of the screen.
• Press the CANCEL button to stop reviewing the clip and change the
camcorder back to record pause mode.
• After the clip finishes playing back, the camcorder returns to record
pause mode.
Options
NOTES
• When you are using a special recording mode (
0
88), you cannot review a clip.
• If the camcorder switched CF cards during a recording, the camcorder will play back the clip on the CF card
most recently recorded on.
Operating modes:
[Entire Clip]:
Allows you to review the entire clip.
[Last 4 sec]:
Allows you to review just the last 4 seconds of the clip.
[
J
Other Functions]
[
Rec Review]
[Entire Clip]
