Canon XC10, Instruction Manual

Page: 54 / 165

Shooting Modes
54
Menus Table of Contents Index
Adjusting Shooting Mode Settings
You can adjust the settings related to the various shooting modes using the FUNC. menu or remotely using the
Browser Remote application.
Using the FUNC. Menu
To change the aperture value when the shooting mode is
n
or
“
1 Touch [FUNC.] and then touch [Aperture].
• The aperture adjustment dial will appear at the bottom of the screen.
2 Drag your finger left/right along the dial to select the desired value.
• You can also press the joystick itself so that the position of the current value is highlighted in orange and
then push left/right to adjust the value.
3 Touch [
X
].
• The selected aperture value will appear on the upper left of the screen.
To change the shutter speed when the shooting mode is
n
or
‚
1 Touch [FUNC.] and then touch [Shutter Speed].
• The shutter speed adjustment dial will appear at the bottom of the screen.
2 Drag your finger left/right along the dial to select the desired value.
• You can also press the joystick itself so that the position of the current value is highlighted in orange and
then push left/right to adjust the value.
3 Touch [
X
].
• The selected shutter speed will appear on the upper left of the screen.
To change the ISO speed or gain when the shooting mode is
n
1 Touch [FUNC.] and then touch [ISO] or [Gain].
• Note that during mode, you cannot adjust the gain.
• The ISO speed or gain adjustment dial will appear at the bottom of the screen.
• You can use the [
v
Camera Setup]
>
[2]
>
[ISO/Gain] setting to switch between ISO speed and gain.
2 Drag your finger left/right along the dial to select the desired value.
• You can also press the joystick itself so that the position of the current value is highlighted in orange and
then push left/right to adjust the value.
3 Touch [
X
].
• The selected ISO speed or gain value will appear on the upper left of the screen.
Using the Browser Remote Application
After completing the necessary preparations (
A
125), you can change the shutter speed, aperture, ISO speed
or gain from a connected device using the Browser Remote application.