Canon XC10 Instruction Manual Download

Page: 53 / 165

Shooting Modes

Menus

Table of Contents

Index

NOTES

• [

Portrait]/[

Sports]/[

Snow]/[

Beach]: The picture may not appear smooth during playback.

• [

Snow]/[

Beach]: The subject may become overexposed on cloudy days or in shaded places. Check

the image on the screen.

• [

Low Light]:

- Moving subjects may leave a trailing afterimage.
- Picture quality may not be as good as in other modes.
- White points may appear on the screen.
- Autofocus may not work as well as in other modes. In such case, adjust the focus manually.

• [

Fireworks]/[

Low Light]: To avoid camcorder blur (blur due to the camcorder moving) we recommend

using a tripod.

[

Sports]:

To record sports scenes such as tennis or golf.

[

Night Scene]:

To record nightscapes with lower noise.

[

Snow]:

To record in bright ski resorts without the subject being underexposed.

[

Beach]:

To record on a sunny beach without the subject being underexposed.

[

Sunset]:

To record sunsets in vibrant colors.

[

Low Light]:

To record in low-light situations.

[

Spotlight]:

To record spotlit scenes.

[

Fireworks]:

To record fireworks.

Summary of Contents for XC10






































































































































































Search results

Summary of Contents for XC10

Reviews:

Related manuals for XC10

Brands by name

Popular brands

Canon XC10, Instruction Manual

Search results

Summary of Contents for XC10

Reviews:

Related manuals for XC10

Brands by name

Popular brands