83
Color Bar
s
/Audio Reference
S
ignal
Color Bars/Audio Reference Signal
You can have the camcorder generate color bars and a 1 kHz audio reference signal and output them from the
SDI OUT terminal (
z
only), HDMI OUT terminal and
×
(headphone) terminal*.
* Audio reference signal only.
Color Bars
You can choose between SMPTE and ARIB color bars.
1
S
elect [Color Bar
s
].
>
[
3
%
Recording Setup]
>
[Color Bars]
2
S
elect the de
s
ired option and then
s
elect [
X
].
• The selected color bars appear on the screen and will be recorded when you press the REC button.
NOTES
NOTES
• You cannot change the type of color bars while recording.
• Color bars cannot be used together with slow & fast motion recording.
• Not available when the gamma curve component of the [Gamma/Color Space] setting in the custom picture
file is set to [Canon Log 3].
Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal with the color bars. You can select one of three audio
levels (–12 dB, –18 dB, –20 dB).
1
S
elect [1
k
Hz Tone].
>
[
3
%
Recording Setup]
>
[1 kHz Tone]
2
S
elect the de
s
ired option and then
s
elect [
X
].
• The signal is output at the selected level and will be recorded when you press the REC button.
Operating modes:
Summary of Contents for XA70
