81
Recording Audio
Low-Cut Filter (Built-in Microphone)
When using the built-in microphone, you can activate the low cut filter to reduce the sound of blowing wind and
other ambient sounds when recording outdoors. When recording in surroundings unaffected by wind or if you
want to record low-frequency sounds, we recommend turning off the low-cut filter.
1 Select [Built-in Mic Low Cut].
>
[
C
"
Audio Setup]
>
[Built-in Mic Low Cut]
2 Select [
i
On] and then select [
X
].
Microphone Attenuator (MIC Terminal)
When one of the audio channels is set to the built-in microphone/MIC terminal, you can activate the microphone
attenuator (20 dB) for an external microphone connected to the MIC terminal to prevent audio distortions when
the audio level is too high.
1 Select [MIC Att.].
>
[
C
"
Audio Setup]
>
[MIC Att.]
2 Select [
i
On] and then select [
X
].
•
å
appears on the right of the screen.
Low-Cut Filter (MIC Terminal)
When one of the audio channels is set to the built-in microphone/MIC terminal, you can activate the low-cut filter
for an external microphone connected to the MIC terminal. The low-cut filter reduces the sound of blowing wind
and other ambient sounds when recording outdoors. When recording in surroundings unaffected by wind or if
you want to record low-frequency sounds, we recommend turning off the low-cut filter.
1 Select [MIC Low Cut].
>
[
C
#
Audio Setup]
>
[MIC Low Cut]
2 Select [
i
On] and then select [
X
].
Summary of Contents for XA70
