Recording Audio
80
Advanced Audio Input Settings
Microphone Sensitivity (INPUT Terminals)
When one of the audio channels is set to the INPUT terminals and the corresponding INPUT1 or INPUT2 switch
is set to MIC or MIC+48V, you can select the external microphone’s sensitivity.
1 Select the desired INPUT terminal’s sensitivity.
>
[
C
!
Audio Setup]
>
[INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]
2 Select the desired option and then select [
X
].
Microphone Attenuator (INPUT Terminals)
When one of the audio channels is set to the INPUT terminals and the corresponding INPUT1 or INPUT2 switch
is set to MIC or MIC+48V, you can activate the external microphone’s attenuator (20 dB).
1 Select the desired INPUT terminal’s attenuator.
>
[
C
!
Audio Setup]
>
[INPUT 1 Mic Att.] or [INPUT 2 Mic Att.]
2 Select [
i
On] and then select [
X
].
•
å
appears on the right of the screen.
Microphone Input Sensitivity (Built-in Microphone)
When using the built-in microphone, you can adjust the input sensitivity.
1 Select [Built-in Mic Sensitivity].
>
[
C
"
Audio Setup]
>
[Built-in Mic Sensitivity]
2 Select the desired option and then select [
X
].
Options
Microphone Attenuator (Built-in Microphone)
When using the built-in microphone, you can activate the built-in microphone's attenuator (20 dB) to prevent
audio distortions when the audio level is too high.
1 Select [Built-in Mic Att.].
>
[
C
"
Audio Setup]
>
[Built-in Mic Att.]
2 Select [
i
On] and then select [
X
].
•
å
appears on the right of the screen.
Audio peak limiter
• If at least one of the channels is set to the INPUT terminals and manual audio level adjustment, you can
activate the audio limiter to lessen audio distortions. Use the
>
[
¡
"
Audio Setup]
>
[INPUT
1/2 Limiter] setting. When activated, the audio limiter will limit the amplitude of audio input signals when they
start to distort.
[
h
Normal]:
For recording audio under usual conditions.
[
High]:
For recording audio at a higher level (+6 db).
Summary of Contents for XA70
