127
Menu Option
s
[
B
S
y
s
tem
S
etup] menu
[Output Onscreen Displays]
[
i
On],
[
j
Off]
When this setting is set to [
i
On], the camcorder’s onscreen displays will appear also on the
screen of a TV or monitor connected to the camcorder.
[Onscreen Markers]
[
j
Off]
, [
4
Level (Gray)], [
3
Level (White)], [
6
Grid (Gray)],
[
5
Grid (White)], [
4:3 (Gray)], [
4:3 (White)]
You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference
to make sure your subject is framed correctly (vertically and/or horizontally).
• Using the onscreen markers will not affect the recordings.
• Displaying the 4:3 marker, you can check the area that is output when the aspect ratio is set to 4:3.
[Distance Units]
[
.
meters],
[
/
feet]
Selects the units to use for the focusing distance display while focusing manually. This setting also
affects units for the altitude in the GPS information of geotagged recordings.
Menu item
Setting options and additional information
[Language
H
]
[
], [Dansk], [Deutsch], [
],
[English]
, [Español], [Français], [Italiano],
[Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [
], [Suomi],
[Svenska], [Türkçe], [
], [
], [
], [
], [
], [
],
[
], [
], [
]
(
A
[Time Zone/DST]
[
"
] (home time zone), [
#
] (travel time zone);
For each: list of world time zones (
[New York]
), [
$
] (DST adjustment): turn on or off
(off)
(
A
[Date/Time]
Date and time adjustment fields; [Date Format]: [Y.M.D],
[M.D,Y]
, [D.M.Y]; [24H]: turn on
(24-hour clock) or off (12-hour clock)
(off)
(
A
In [Date Format] options, Y=year, M=month, D=day.
[POWER LED], [Tally Lamp],
[ACCESS LED]
[
i
On]
, [
j
Off]
These settings determine whether the following LEDs and indicators will illuminate.
[POWER LED]: The green POWER/CHG indicator.
[Tally Lamp]: When this setting is set to [
i
On], the tally lamp illuminates while the camcorder is
recording, the remaining battery charge is too low or a card is full.
[ACCESS LED]: The ACCESS indicator when the camcorder is accessing an SD card.
[REMOTE Terminal]
[
RC-V100 (REMOTE A)],
[
Standard]
(
A
[Assignable Button 1] to
[Assignable Button 5]
Following are the default settings for each assignable button. For a complete list of the
functions that can be assigned, refer to the detailed table.
1:
[
B
AF/MF]
, 2:
[
±
Powered IS]
, 3:
[
z
Pre REC]
, 4:
[
Rec Review]
,
5:
[
^
Magnification]
(
A
[Onscreen Assignable Button]
For a complete list of the functions that can be assigned, refer to the detailed table
(default:
[
Photo]
).
(
A
[CUSTOM Dial & Button]
[
IRIS / SHTR / GAIN], [
AGC Limit], [
y
Exposure Comp.],
[
j
Off]
(
A
[Battery Info]
—
Displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (
mode) or playback time (
mode).
• If the battery pack is depleted, the battery information may not be displayed.
[Backup Menu/
/
7
]
[Save], [Load]
(
A
Load or save menu settings and custom picture files between the camcorder and the SD card B.
[USB Mode]
[
Video Output (UVC)],
[
GP-E2]
(
A
[GPS Auto Time Setting]*
[
i
Auto Update],
[
j
Disable]
(
A
Menu item
Setting options and additional information
Summary of Contents for XA70
