Preparing the Camcorder
29
To use the wireless controller
Point the wireless controller at the camcorder’s remote sensor when you press the buttons.
• You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the
camcorder.
• When you operate the wireless controller, the camcorder's tally lamp will illuminate.
NOTES
• When the camcorder cannot be operated with the wireless controller, or when it can only be
operated at very close range, replace the battery.
• The wireless controller may not work properly when the remote sensor is situated under strong light
sources or direct sunlight.
Using a Tripod
You can mount the camcorder on a tripod but do not use tripods
with mounting screws longer than 6.5 mm (0.26 in.) as this may
cause damage to the camcorder.
Summary of Contents for XA10
Page 1: ...PUB DIM 1008 000 ...
