Projector Web Screen Menu
200
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, see “Network Setting” (
Item
Explanation
Factory default setting
Error report
Select whether to turn the error mail
sending function on or off, and IPv4 or
IPv6 for the network to use.
OFF
To:
Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 – 63 characters).
MailUserAccount
Cc:
Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 – 63 characters).
<Blank>
From:
Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 – 63 characters).
IPv4 SMTP server IP
address
Enter the SMTP server IP address
(IPv4) in 1-byte numbers.
0.0.0.0
IPv4 SMTP server port
number
Enter the SMTP server port number
(IPv4) in 1-byte numbers (1 – 65535).
25
IPv6 SMTP server IP
address
Enter the SMTP server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 SMTP server port
number
Enter the SMTP server port number
(IPv6) in 1-byte numbers (1 – 65535).
25
Mail resend interval*
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 – 59 seconds
using 1-byte numbers.
10