Menu Description
80
Aspect
> [Input settings] >
[Aspect]
Select a projection aspect ratio for images.
Menus that are not available are hidden.
Auto PC
> [Input settings] >
[Auto PC]
Automatically adjusts display position misalignment and screen flickering.
Input signal select
> [Input settings] >
[Input signal select]
Select a suitable resolution if Auto PC (
) does not project computer images
correctly.
Select the input signal that matches the computer resolution. Press the
OK
button
to confirm the setting, and then press the
MENU
button.
Submenu
Function
Auto
An image is projected at the aspect ratio of the input signal.
16:10
The image is projected using an input signal aspect ratio of 16:10.
16:9
The image is projected using an input signal aspect ratio of 16:9.
4:3
The image is projected using an input signal aspect ratio of 4:3.
Zoom
This cuts the upper/lower or left/right part of the screen according
to the screen aspect and zooms in or out of the center of the
image.
True size
The image is projected with the original resolution of the input
signal.
• For LAN and USB input, [Auto] is selected automatically.
• Different contents are displayed for different screen aspects or input signal types.
• The
ASPECT
button on the remote control can also be used to select the [Aspect]
settings.
If the Auto PC adjustment is insufficient, perform the following operations.
• Select the input signal that matches the computer resolution from [Input signal select].
• If adjustment remains insufficient, adjust [Total dots], [Tracking], [Horizontal/Vertical
position] and [Horizontal/Vertical pixels] in [Input signal settings]. (
)
• For the signal types supported by the projector, see “Supported Signal Types” (
).
For the signal types supported by the projector, see “Supported Signal Types” (
–
Summary of Contents for WUX500ST
Page 168: ...168 ...
