Menu Description
106
Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control
can be used with each projector.
Selecting the Projector Channel
If an optional wired remote control (RS-RC05) is used, there is no need to set the remote
control channel.
Option
Function
Ch1
Ch2
Ch3
Ch4
Select the remote control channel to use with this projector.
Independent
Can be controlled from a remote control set to any channel.
Selecting a Channel on the Remote Control
After changing the projector channel from the menu, always change the remote control
channel accordingly.
Audio in terminal select
Select the source terminal for audio output.
Option
Function
Off
No audio is output.
Audio in 1
Use audio signals from AUDIO IN 1 for audio output.
Audio in 2
Use audio signals from AUDIO IN 2 for audio output.
HDMI
Use HDMI audio signals for audio output.
HDBaseT
Use HDBaseT audio signals for audio output.
LAN
Use LAN audio signals for audio output. Audio is transferred by the
NMPJ application.
To Unlock Key Lock Function
Turn off the projector and unplug the power plug. Hold down the
OK
button on the main unit
and plug in the power cord, as you continue to hold down the
OK
button. In a moment, a
beep will sound, and the controls will be unlocked.
When you access this setting from the projector’s side controls, [Main unit] is not
available. Similarly, when you access the setting from the remote control, [Remote
(wireless)] is not available.
Ch1
Hold both the
OK
button and [ ] button for 3 seconds.
Ch2
Hold both the
OK
button and [ ] button for 3 seconds.
Ch3
Hold both the
OK
button and [ ] button for 3 seconds.
Ch4
Hold both the
OK
button and [ ] button for 3 seconds.
Independent
Hold both the
OK
button and
MENU
button for 3 seconds.
Audio is transferred via the port selected in [Communication
settings] > [Wired network] (
Summary of Contents for WUX500ST
Page 168: ...168 ...
