WUX500ST
User Commands
-87-
TEMP
Temperature sensor value inquiry
Format
Setting
Command
-
Response
-
Reference
Command
GET=TEMP
Response
g:TEMP=<Number of sensors>,<Sensor 1 value>,…,<Sensor n
value>
Note: See "Error list" for any response other than the above.
Environment
Power mode restriction
Input
LAN
WiFi
RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No
signal
No No Yes Yes Yes No No No No Yes Yes Yes Yes
Yes
Yes
Yes
Yes
Yes Yes Yes
Yes
Remarks
(1) There are cases when number of sensors is 0. In this case, there will not be a comma.
Example
> GET=TEMP
References the temperature sensor value.
< g:TEMP=5,28.5,53.3,53.3,53.3,33.0
Note: '>' indicates a command; '<' indicates a response.
