WUX500ST
User Commands
-80-
SAT
Color saturation setting
Format
Setting
Command
SAT=<Color saturation setting value:Number>
Response
i:OK
Reference
Command
GET=SAT
Response
g:SAT=<Color saturation setting value:Number>
Note: See "Error list" for any response other than the above.
Setting values for <Color saturation setting value:Number> are -20 to 20.
Environment
Power mode restriction
Input
LAN
WiFi
RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No
signal
No No No No Yes No No No No Yes No No Yes
Yes
Yes
Yes
Yes
Yes Yes Yes
Yes
Remarks
(1) This sets the currently selected input signal and image mode.
Example
(Setting)
>SAT=-10
< i:OK
(Reference)
> GET=SAT
< g:SAT=1
Note: '>' indicates a command; '<' indicates a response.
