Canon WUX500ST, User Commands

Page: 75 / 95

WUX500ST User Commands
-72-
OVSCAN
Overscan setting
Format
Setting Command OVSCAN=<Overscan setting parameter:ID>
Response i:OK
Reference Command GET= OVSCAN
Response g:OVSCAN=<Overscan setting parameter:ID>
Note: See "Error list" for any response other than the above.
<Overscan setting parameter:ID>
Parameter Meaning
OFF Turns overscan to OFF
ON Turns overscan to ON
Environment
Power mode restriction Input
LAN WiFi RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB No
signal No No No No Yes No No No No Yes No No Yes No No No Yes Yes No No Yes
Remarks
(1) The setting is fixed to [OFF] depending on the setting status of other functions or the status of the
input signal.
Example
(Setting)
> OVSCAN=ON
< i:OK
(Reference)
> GET=OVSCAN
< g:OVSCAN=ON
Note: '>' indicates a command; '<' indicates a response.