Canon WUX500ST, User Commands

Page: 72 / 95

WUX500ST User Commands
-69-
NR
Random noise reduction
Format
Setting Command NR=<Random noise reduction setting parameter:ID>
Response i:OK
Reference Command GET=NR
Response g: NR=<Random noise reduction setting parameter:ID>
Note: See "Error list" for any response other than the above.
<Random noise reduction setting parameter:ID>
Parameter Meaning
OFF Turned off
WEAK Weak
MIDDLE Middle
STRONG Strong
Environment
Power mode restriction Input
LAN WiFi RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB No
signal No No No No Yes No No No No Yes No No Yes Yes Yes Yes Yes Yes No No Yes
Remarks
(1) This sets the currently selected input signal and image mode.
Example
(Setting)
>NR=MIDDLE
< i:OK
(Reference)
> GET=NR
< g:NR=MIDDLE
Note: '>' indicates a command; '<' indicates a response.