Canon WUX500ST, User Commands

Page: 60 / 95

WUX500ST User Commands
-57-
IMAGEFLIP
Flip display
Format
Setting Command IMAGEFLIP=<Image flip setting parameters:ID>
Response i:OK
Reference Command GET= IMAGEFLIP
Response g: IMAGEFLIP=<Image flip setting parameters:ID>
Note: See "Error list" for any response other than the above.
< Image flip setting parameters:ID >
Parameter Meaning
NONE None
CEILING Ceiling mount (upside down and right side
left)
REAR Rear (right side left)
REAR_CEILING Rear, ceiling mount (upside down)
Environment
Power mode restriction Input
LAN WiFi RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB No
signal No No No No Yes No No No No Yes No No Yes Yes Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) When the display is flipped, the "keystone distortion" settings are initialized.
Example
(Setting)
>IMAGEFLIP=REAR
< i:OK
(Reference)
>GET=IMAGEFLIP
< g:IMAGEFRIP=REAR_CEILING
Note: '>' indicates a command; '<' indicates a response.