Menu Description
86
Micro-digital image shift
Use this setting to fine-tune the position of the projected image.
Option
Function
Off
Does not perform micro digital image shift.
Adjust
Adjust
Use the [ ] / [ ] buttons for vertical shift and the [ ] /
[ ] buttons for horizontal shift.
Chart
Displays a chart to assist in adjustment. Watch the chart
as you fine-tune the position.
Return
Dismiss the chart.
Registration
Adjusts colors that are out of alignment. You can adjust red, green and blue registration
independently.
Option
Function
Off
Does not perform image registration.
Adjust
Red / Green /
Blue
Use the [ ] / [ ] buttons for vertical shift and the [ ] /
[ ] buttons for horizontal shift.
Chart
Displays a chart to assist in adjustment. Watch the chart
as you fine-tune the position.
Return
Dismiss the chart.
Fan mode
Switch the fan mode to suit installation at low or high altitudes (above 2,300 m (7,545.8')).
Option
Function
Normal
Setting for altitudes lower than 2,300 m (7,545.8').
High altitude
Setting for altitudes of 2,300 m (7,545.8') or higher.
Vertical projection
You can ensure adequate cooling by switching the fan mode to suit upward- or downward-
facing installations.
Option
Function
Off
Does not alter the fan mode.
Upward
Setting for use when the projector faces upward.
Downward
Setting for downward projection.
Incorrect settings may shorten the useful life of the lamp or other parts.
• Be sure to perform this setting to use vertical projection.
• Even if you complete this setting, vertical projection will result in a shorter useful life
of the lamp and other parts than horizontal projection.
Summary of Contents for WUX500
Page 36: ...36 ...
Page 156: ...156 ...