![background image](http://html.mh-extra.com/html/canon/wux500/wux500_user-manual_62615138.webp)
Menu Description
138
Controlling the Projector from a Computer
The projector can be controlled from a computer over a wired or wireless network
connection.
1
Turn on the computer and projector.
2
Launch a web browser, enter “http://(projector IP address)” in the
address bar, and press the Enter key.
The projector web screen appears.
3
Click [Projector control] on the web screen.
The password input window appears.
4
Enter the user name and password on the password input window, then
click [OK].
The factory default user name is “root” and the password is “system”.
The projector control screen appears.
The projector can be controlled from this screen.
The projector’s own default IP address is 192.168.254.254 for wired connections and
192.168.253.254 for wireless connections. If DHCP settings are used, ask the network
administrator for the projector IP address. It is possible to check the IP address from the
projector menu.
Item
Explanation
Projector name
The name of the connected projector is displayed. (
Comment
Shows notes, such as where the projector is installed. (
)
Refresh
Refreshes the displayed contents with the most recent information.
Power
Turns projector power on or off.
Input
Select an input signal and click [Apply] to change to that input signal.
(
)
Aspect
Select an aspect and click [Apply] to change to that aspect. (
Image mode
Select an image mode and click [Apply] to change to that image mode.
(
)
Blank
Switches the blank setting on or off. (
Mute
Switches the mute setting on or off. (
)
Auto PC
Summary of Contents for WUX500
Page 36: ...36 ...
Page 156: ...156 ...