7
Waterproof Seal
3
Release the catch to open the case.
When using commercially available
•
anticondensation products, the
anticondensation solution should only
be applied to the inside surface of the
lens window using a soft, dry cloth. If
anticondensation solution comes in contact
with any surface other than the inside of the
lens widnow, wipe it off immediately with a
soft, dry cloth, as it could lead to deterioration
of the Waterproof Case.
4
Apply silicon grease to the waterproof
seal.
Remove the waterproof seal as shown.
1 .
Do not dig your fingernails into it or pull
•
on it forcibly.
Using a cotton swab, wipe off any debris in
2 .
the mounting groove.
Apply a small amount (droplet) of grease to
3 .
your fingertip, and evenly coat the entire
surface of the waterproof seal.
Place the waterproof seal back in the seal
4 .
mounting groove.
Take care not to twist it.
•
COP
Y