Canon WP-DC31, User Manual

Page: 30 / 146

11
4
Slide the lock release switch as
shown, and release the catch to
open the case.
• When using commercially available
anticondensation products, the
anticondensation solution should only be
applied to the inside surface of the lens
window using a soft cloth. If
anticondensation solution comes in contact
with any surface other than the inside of the
lens window, wipe it off immediately with a
soft, dry cloth, as it could lead to
deterioration of the Waterproof Case.
Use the neck strap when carrying the camera
on the beach. Remove the neck strap and
attach the wrist strap before use underwater.
There is danger that the neck strap will
become entangled and cause strangulation or
another mishap.
Do not use the strap included with the camera
with the Waterproof Case.
Apply a thin coat of grease to the entire seal
before using the Waterproof Case in order to
prevent abrasion and deterioration.
For waterproof seal handling precautions, see
Waterproof Seal
(p. 6).
1. Remove the waterproof seal.
2. Using a cotton swab, wipe off any debris
(e.g. sand, dirt or hair) which is present on
the waterproof seal and on the seal
mounting groove of the Waterproof Case.
3. Apply a small amount (droplet) of grease to
your fingertip.
4. Evenly coat the entire surface of the
waterproof seal, taking care not to scratch
the surface.
5. Place the waterproof seal back in the seal
mounting groove of the Waterproof Case.
COP
Y