manualshive.com logo in svg

Canon WFT-E9, Advanced User'S Manual

Share
Download
Canon WFT-E9 Advanced User'S Manual Download Page 82

Auto Retry if Transfer Fails

If transfer fails, the <

> lamp on the camera blinks in red. In this case, press the

<

> button and select [

: 

Network settings

]. The following screen is displayed.

To resolve the error displayed, see the 

Responding to Error Messages

.

Once the cause of the error is eliminated, the images whose transfer previously failed will be
re-transferred automatically. With this option activated, transfer is attempted again
automatically after failure, whether automatic transfer is used or captured images are
transferred via FTP. Note that when you cancel image transfer or turn off the transmitter or
camera, the image will not be re-transferred automatically.
See 

Batch Transfer

 and transfer the images.

Note

If you prefer not to disconnect from the LAN, set [

Power saving

] on the [

FTP

transfer settings

] screen (

) to [

Disable

].

82

Summary of Contents for WFT-E9














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands