manualshive.com logo in svg

Canon WFT-E8A, Instruction Manual

Share
Download
Canon WFT-E8A Instruction Manual Download Page 53

53

Images transferred to the FTP server are stored in the following folder 
as specified in the FTP server settings.

Under the default settings of the FTP server, images are stored in [

C 

drive

] 

9

 [

Inetpub

] folder 

9

 [

ftproot

] folder, or in a subfolder of this 

folder.

If the root folder of the transfer destination has been changed in the 
FTP server settings, ask the FTP server administrator where images 
are transferred.

Under the default settings, transferred images will be stored in the root 
folder specified in the FTP server settings, in a folder structure such as 
“A/DCIM/100EOS1D”, which is automatically created.
However, when a CF card has been selected for recording and 
playback, a folder structure such as “A/DCIM/100EOS1D” will be 
automatically created; when a CFast card has been selected, the folder 
structure will be “B/DCIM/100EOS1D”. (Images will be stored 
separately, with CF card images in folder A and CFast images in folder 
B.)

Viewing Transferred Images

Target Folders for the FTP Server

Folders for Image Storage

Summary of Contents for WFT-E8A

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands