Canon WFT-E8 Instruction Manual Download Page 76

Page: 76 / 152

These instructions are continued from Chapter 1.



To establish connection, operations on the smartphone are required.
For details, refer to the smartphone’s instruction manual.

Start Camera Connect on the
smartphone.



When the [

Waiting to connect

]

screen is displayed on the camera’s
LCD monitor, start Camera Connect
on the smartphone.

Select the camera to connect to
on the smartphone.



Select and tap the camera to connect
to from [

Cameras

] on Camera

Connect.



If multiple cameras are displayed,
identify the camera to connect to by
its MAC address displayed on the
camera’s LCD monitor.

Configuring Smartphone Connection Settings

Operation on the Smartphone

The MAC address of the transmitter can also be checked on the [

Function

settings

] screen (p.114).

Summary of Contents for WFT-E8

























































































































































Search results

Summary of Contents for WFT-E8

Reviews:

Related manuals for WFT-E8

Brands by name

Popular brands

Canon WFT-E8, Instruction Manual

Search results

Summary of Contents for WFT-E8

Reviews:

Related manuals for WFT-E8

Brands by name

Popular brands