47
Transferring Images Individually
If transfer fails, the <
Y
> lamp on the
camera blinks in red. In this case, press the
<
M
> button, select [
Communication
settings
] under the [
5
3
] tab, and press
<
0
>. When the screen shown on the left is
displayed, check the error code number and
see page 118 to eliminate the cause of the
error.
Once the cause of the error is eliminated, the images whose transfer
previously failed will be re-transferred automatically. With this option
activated, transfer is attempted again automatically after failure,
whether automatic transfer is used or captured images are transferred
via FTP. Note that when you cancel image transfer, or turn off the
camera, the image will not be re-transferred automatically. See page 48
and transfer the image.
Auto Retry if Transfer Fails
By setting the power saving function on the [
Function settings
] screen
(p.114), you can log off the transmitter from the FTP server after transfer
and stop the LAN connection.
Summary of Contents for WFT-E8
