Canon WFT-E8, Instruction Manual

Page: 32 / 152

32
Connecting to a Detected Network Manually

Enter the encryption key (password) specified for the access point.
For details on the specified encryption key, refer to the access
point’s instruction manual.

The screens displayed in steps 2 to 4 below vary depending on the
authentication and encryption specified for the access point.

Go to page 34 when the [ IP address set. ] screen is displayed
instead of the screens for steps 2 to 4.
2
Select a key index.

The [ Key index ] screen is displayed
only if WEP encryption is used by the
access point.

Select the key index number
specified for the access point, then
press <
0
>.

Select [ OK ] and press <
0
> to go to
the next screen.
3
Select the format and the number
of characters used for the key.

Select [ OK ] and press <
0
> to go to
the next screen.
Entering the Access Point Encryption Key