30
These instructions are continued from Chapter 1.
1
Turn the <
5
> dial to select [
Address setting
],
and then press <
0
>.
2
If you have set the DNS server setting to
[
Disable
], the screen at left is displayed.
Press <
0
> to select the input position, and then
turn the <
5
> dial to enter the IP address of the
FTP server.
If you have set the DNS server IP address setting
to [
Auto assign
] or [
Manual setting
], the screen
at left is displayed.
For instructions on screen operations, refer to
“Virtual Keyboard Operation” (p.27).
Enter the FTP server’s server name or IP address.
3
In [
Port number setting
], enter 00021, in most
cases.
Turn the <
5
> dial to select [
OK
], and then press
<
0
> to go to the next screen.
4
Complete the [
Proxy server
] settings.
Turn the <
5
> dial to select [
OK
], and then press
<
0
> to go to the next screen.
Configuring FTP Transfer Settings
COP
Y
Summary of Contents for WFT-E4A
