Canon w-e1, Instruction Manual

Page: 76 / 98

76
When a connection error occurs, display the details of the error by
following one of the procedures below. Then, eliminate the cause of the
error referring to the examples shown in this chapter.

Select [ Error details ] on the [ General sett. ] screen, then press
<
0
> (p.72).

Select [ Error details ] on the [ Wi-Fi on ] screen, then press <
0
>.
Click the error code number’s page in the following chart to jump to the
corresponding page.
Responding to Error Messages
11 (p.77) 12 (p.77)
21 (p.78) 23 (p.79)
61 (p.80) 63 (p.81) 64 (p.81) 65 (p.82) 66 (p.82)
67 (p.82) 68 (p.83) 69 (p.83)
91 (p.83)
When an error occurs, [ Err** ] is displayed on the upper right of the [ Error
details ] screen. It disappears when the camera’s power is set to <
2
>.