Canon w-e1, Instruction Manual

Page: 41 / 98

41
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.

Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.

It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].

Under the [
5
3 ] tab, select [ Wi-Fi
function ], then press <
0
>.
2
Select an item.

Use <
5
> or <
9
> to select an item,
then press <
0
>.
3
Select [Select a network].

Select [ OK ] and press <
0
> to go to
the next screen.
Connecting via WPS (PIN Mode)