Canon VK-16 v2.1, Administrator'S Manual

Page: 101 / 288

4-21
Register Camera Server
Register Camera Ser
v
e
r an
d Set
Re
cordin
g
Sch
edul
e
Configure External Device Input
To switch On or Off the external device input, check the [ Invert the state of the following external ] option.
One or more inputs may be shown depending on the type of the Camera Server. It is not necessary to change
this setting if it is not required.
Assign a location and zone
1. If multiple [Cam] tabs are shown to the right of the screen, select a tab for the Camera Server to edit settings.
2. Change the name of the Camera Server in the [Camera Name] field as required.
3. In the [Location] field, select a location for the Camera Server from the drop-down menu.
4. In the [Zone] field, select a zone for the Camera Server from the drop-down menu.
If necessary, click [ Add ] to add another Location or Zone.
The [ Add Location ] or [ Add Zone ] dialog opens.
Enter the [ Location Name ] or [ Zone Name ] and click [ OK ].
When you add a Zone in the [ Add Zone ] dialog, you should also add it to a Location in the same dialog.
Select a location from the drop-down menu.
See P. 4-12 for how to add locations and zones.
Note
z
Enter the [ Camera Name ] in up to 15 characters.
z
Changing the [ Camera Name ] setting here does not change the camera name of the Camera Server.
VK-64_SysManual_Ev21.book 21 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY