Canon VK-16 v2.1, Administrator'S Manual

Page: 268 / 288

9-26
Messages List
Error resolving
name for SMTP
server host: port
Error: <Winsock
error code>: <Error
message>
When sending E-mail, the recording
engine could not resolve the host name
of the SMTP server. See the corresponding Winsock error
code in "Error Codes in Log File" (
P. 9-
30).
Error connecting
SMTP to server
host: port
Error: <Winsock
error code>: <Error
message>
When sending E-mail, the recording
engine could not connect to the SMTP
server. See the corresponding Winsock error
code in "Error Codes in Log File" (
P. 9-
30).
Error sending E-
mail.
SMTP server log
follows: <SMTP
error message>
The recording engine could not send E-
mail due to a communication error with
the SMTP server. Please see the SMTP
server log for details.
See the corresponding SMTP error code
in "Error Codes in Log File" (
P. 9-30).
NVR recording
engine stopping This is always displayed when the
recording engine stops.
No action is required.
NVR Recording
Engine startup
complete. Log level
= (<log level>)
This is always displayed when the
recording engine starts. The value in
Log Level indicates the log level that is
currently being configured (The default
is 1).
No action is required.
Unable to register a
drive for camera
<host>:<port>.
The storage destination drive configured
for this camera server has been deleted.
Change the storage destination drive of
the camera server in [
Configuration ] of
the Viewer.
Error deleting old
file <windows error
message>.
A system error occurred when deleting
the file. This file is probably being used
by the access engine or other
application. When this file is being used
for playing a recorded video, this error is
normal.
There is no necessary action.
Error writing frame
for camera
<camera>: <error
message>
Cannot write data in the hard disk.
Check to ensure that the specified drive
is not configured as read-only. In
addition, ensure that all directories in
this path are writable. When the drive
cannot be used due to the above
reason, configure it in a way so that
there are no camera servers records on
this drive. *This is also recorded when
the date & time of the PC is reset to past.
When this occurs, this error will no
longer be recorded when the date and
time is reset to the current date and
time.
Messages Cause Action
VK-64_SysManual_Ev21.book 26 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY