Canon VK-16 v2.1, Administrator'S Manual, Page: 262 / 288

9-20
Messages List
Viewing
Screen
Failed to trigger manual recording for
camera "<camera name>" on storage
server "<storage server name>".
*The following message is added when the
number of camera servers exceeds the
licensing restrictions.
Number of licenses exceeded.
Manual recording could not be started.
This will replace an existing layout of the
same name. Are you sure?
An attempt was made to save the layout
sequence in the folder using a name that is
already been registered as a layout or
layout sequence.
An attempt was made to save the layout
sequence with a name that is already being
used for a layout or layout sequence in the
destination folder.
The number of MPEG-4 video windows
exceeds 20.
Do you wish to switch this video window to
display MPEG-4?
The number of videos where MPEG-4 was
selected as the [
Selection of receiving
image ] exceeds 20.
Saving/
Managing
Video Layouts
You cannot delete
<layout name>
because it is the current layout or it
contains the current layout or layout
sequence.
An attempt was made to delete a layout
that is currently being used.
You must enter a non blank name. Please
check your settings and try again. An attempt was made to add a layout
folder without entering the name.
Menu Buttons The image could not be saved.
An error occurred when you attempted to
capture a snapshot in the Video Window.
Extracting
Video
Could not save video because there was
no data to record.
There are no recorded videos for the
selected segment thus they could not be
saved.
The image could not be saved.
The Windows folder or Program Files folder
was specified as the destination folder for
still frames or MOV files.
Messages Cause
VK-64_SysManual_Ev21.book 20 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY