manualshive.com logo in svg

Canon VK-16 v2.1, Administrator'S Manual, Page: 241 / 288

Share
Download
Canon VK-16 v2.1 Administrator'S Manual Download Page 241

8-7

System Ma

intena

nce

Camera Server Maintenance

The information about the latest firmware and backup/restore tools can be obtained on Canon Web site.

Procedure for Updating Camera Firmware

When updating firmware, use proper tools for each model.

1. Obtain the latest firmware including the firmware update tool as well as backup and restore tools for 

configured values.

2. Save the values configured in the Camera Server by using the backup tool for configured values.

3. Perform the Firmware update by using the firmware update tool.

If a failure occurs in step 3, restore the settings by using the restore tool for configured values.

VK-64_SysManual_Ev21.book  7 ページ  ２００９年３月２日　月曜日　午後１時３分

CO

PY

Summary of Contents for VK-16 v2.1

































































































































































































































































































Reviews:

No comments