Canon VK-16 v2.1, Administrator'S Manual, Page: 113 / 288

4-33
Set Normal Schedule
Register Camera Ser
v
e
r an
d Set
Re
cordin
g
Sch
edul
e
Set the recording period
Click the hours or minutes fields to select, then click the up/down arrows or directly enter a value to change
time.
Select a day of the week to record video
In the [ Repeat on ] area, check the days you wish to repeat the recording period you have set in the [ Times ]
area above.
Set Continuous Recording
1. Click the [Continuously at Max.] box if you want to set continuous recording for the duration of the time
period.
2. Select a frame rate for recorded video from the drop-down menu, or input a value from the keyboard.
You can set the frame rate from 0.1 frames per second to 30 frames per second. The default is 5 frames par
seconds. The upper limit is 5 frames per second with VK-Lite.
See P. 4-45 for details of Continuous Recording.
Tip
z
Time period could be set for overnight recording such as [
Start
] 22:00 to [
End
] 08:00.
z
Click [ All Day ] if you want 24 hour recording. The [ Start ] and [ End ] times will be set at 00:00 respectively.
Note
z
If you have defined any special day schedules, at that time the schedules will override normal schedule
times for the whole day.
z
Times are given in 24 hours.
z
If Camera Server has been configured with [ Restrict Service Time ], VK-64/VK-16 will not be able to record
from the Camera Server during restricted times.
z
The time zone used for the recording schedule will be the time of PC where the Storage Server is running.
z
The Storage Server will adjust for Daylight Savings if configured in the operating system.
VK-64_SysManual_Ev21.book 33 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY