Canon VIXIA HF S30, Instruction Manual

Page: 178 / 212

178 Š
Additional Information
List of Messages
Following the list of messages for the camcorder you can find separate
lists for print-related messages (
0
184).
Accessing the memory card. Do not remove the memory card.
- You opened the memory card slot cover while the camcorder was accessing the memory card
or the camcorder started accessing the memory card as you opened the memory card slot
cover. Do not remove the memory card until this message disappears.
Back up recordings regularly
- This message may appear when you turn on the camcorder. In the event of a malfunction,
recordings may be lost so back up your recordings regularly.
Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.
Built-in memory error
- The built-in memory could not be read. Contact a Canon Service Center.
Built-in memory is full
- The built-in memory is full ([
f
End] appears on the screen). Delete some recordings
(
0
59, 108) to free some space. Save your recordings (
0
134) and initialize the built-in
memory (
0
42).
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(
0
37).
- There was an error creating the file name. Set
8 8
[Photo Numbering] to [Reset] and
initialize the memory card or delete all the photos (
0
108) and all the scenes in the [For Web
Upload] and [For DVD Burning] index screens (
0
59).
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on memory card
Y
. Delete some recordings on the memory card (
0
59, 108) or reduce the number of
scenes to copy.
(in alphabetical order)
COP
Y