background image

78 

Š

 

Video

Options

(



 

Default value)

Mini Video Light

You can turn on the mini video light to shoot video or take photos in 
dark places.

POINTS TO CHECK

• Select a recording program other than [

r

 Underwater] or 

[

s

Surface].

Y

 appears on the screen.

• Repeat, selecting [

B

Off], to turn off the mini video light.

[

U

 Off]



Records with no image enhancing effects.

[

V

 Vivid]

Emphasizes the contrast and color saturation.

[

W

 Neutral]

Tones down the contrast and color saturation.

[

X

 Low Sharpening]

Records subjects with softened outlines.

[

Y

 Soft Skin Detail]

Softens the details in the skin tone area for a 

more complimentary appearance. To obtain the best effect, use 
this setting when recording a person in close-up. Note that areas 
similar to the skin color may lack in detail.

[

Z

 Custom Effect]

Allows you to adjust the color depth, bright-

ness, contrast, and sharpness of the image.

[Color Depth]:

 

(

V

) Shallower, (

U

) Richer.

[Sharpness]:

 

(

V

) Softer, (

U

) Sharper.

[Contrast]:

 

(

V

) Softer, (

U

) Sharper.

[Brightness]:

 

(

V

) Darker, (

U

) Brighter.

Operating modes:

[FUNC.] 

8

 [

Y

Video Light] 

8

 [

A

On] 

8

 [

a

]

Summary of Contents for VIXIA HF M300



















































































































































































































Reviews: